Hobbywing Xerun AXE 2800kv 540L R2 FOC Motor & ESC Combo Rock Crawler 38020313

Hobbywing's AXE FOC Crawler system has been designed with a very unique feature protecting your ESC from damage caused by Battery Reverse Polarity, so no matter how many times you reverse the battery connections the AXE ESC and the paired motor are safe from damage.

The IP-67 waterproof has been taken to a new level with the AXE System. Completely sealed ESC design with robust heatsink case design ensure the ESC is ready for anything you throw at it. The motor as well, is sealed and combines a completely new sensor harness. No messy extra steps to make your system water proof.

AXE FOC Crawler system supports dual running mode, not only classic "Forward and Reverse (rock crawler)" mode, but also "Forward/Reverse with brake (normal)" mode, to satisfy your application.

Drag brake rate, and drag brake tuning allows scalers to adjust not only the hill/hold/drag brake, but how quickly the brake applies. This allows high speed driving with out sudden jerks or stops when releasing the throttle. The drag brake itself is super charged, and able to be run at extremely high levels. Compared to a standard crawling brushless setup, the drag brake in the Axe System can be rated at 200% in comparison.

Built in Bluetooth connectivity means exactly that. The ESC has Blue Tooth built right in! Nothing extra is needed to access the ESC’s complete on
board programming but your smart phone device and the Free Hobbywing App from your App Store. That’s right folks, the Bluetooth feature is BUILT INTO the ESC. No extra devices, wires or connections required! Please download the new version of V2 App. The old version of the APP is not supported.

The built-in switch mode BEC with a maximum output of 13A and voltage adjustable between 6V and 7.4V allows the use of various standard servos, high voltage servos and other peripherals.

ESC Specifications

• Type: Brushless/Sensored
• Waterproof: IP67 rating
• Cont./Peak Current: 80A/480A
• Input Voltage: 2-3S Lipo or 6-9 Cell NiMH
• BEC Switch Mode: 6A @ 6V/7.4V
• Input Wires: 14AWG 200mm
• Input Connectors: XT60
• Output Wires/Connectors: Yes - only fits AXE R2 motors!
• SET Button programing on ESC: Not Supported
• LED Program Box: Not Supported
• LCD Program Box: Not Supported
• WiFi Module: Not Supported
• Programming Port: Built-in Bluetooth
• Firmware Upgrade: Supported
• ESC Size: 47.4 x 36.2 x 26.5mm
• ESC Weight: 108g (Including the weight of input wires)

Motor Specifications

• Type: Brushless/Sensored
• Poles: 4
• KV Rating: 2800
• Cells: 2-3s LiPo
• No Load Current: 2.5A
• Outside Diameter: 36 mm
• Length: 57.8mm
• Shaft: 3.17mm
• Weight: 233g
• Motor application: Only supports the AXE R2 ESC
• Vehicles: 1/10 Rock Crawlers

Note: requires soldering