{"product_id":"protek-rc-6-6v-2100mah-life-futaba-transmitter-battery-ptk-5188","title":"ProTek RC 6.6V 2100mAh LiFe Futaba Transmitter Battery PTK-5188","description":"\u003cp\u003eThe ProTek RC PTK-5188 LiFe Futaba Transmitter Battery Pack is a 6.6V 2100mAh rechargeable battery designed to power compatible Futaba RC transmitters. Featuring stable LiFePO4 (lithium iron phosphate) chemistry, a compact soft-case design and a JR\/Futaba-style power connector, it provides a convenient alternative to disposable transmitter batteries and compatible original rechargeable packs.\u003c\/p\u003e\n\u003cp\u003eThe two-cell LiFe battery delivers a nominal 6.6V output with a capacity of 2100mAh, offering consistent power delivery and low self-discharge for RC enthusiasts who want a transmitter battery that retains its charge well between driving sessions.\u003c\/p\u003e\n\u003cp\u003eDesigned for a range of Futaba radio systems, PTK-5188 is listed as compatible with models including the 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX and 7PXR, along with selected other Futaba transmitters. Always verify the battery compartment dimensions, connector polarity and transmitter voltage requirements before installation.\u003c\/p\u003e\n\u003cp\u003eThe pack measures approximately 76 x 41 x 17mm and weighs 105g. It features a JR\/Futaba-style discharge connector and an XH balance connector for charging with a compatible LiFe balance charger.\u003c\/p\u003e\n\u003cp\u003eFor battery longevity, ProTek recommends charging at a maximum of 1C, equivalent to 2.1A for this 2100mAh pack. Use a charger with a dedicated 2S LiFePO4 setting; chargers that support only NiMH, NiCd or LiPo charging must not be used without a suitable LiFe charging mode.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine ProTek RC Battery: Original transmitter battery pack PTK-5188.\u003c\/li\u003e\n\u003cli\u003e2100mAh Capacity: Rechargeable power for compatible Futaba radio transmitters.\u003c\/li\u003e\n\u003cli\u003e6.6V Nominal Voltage: Two-cell LiFePO4 configuration.\u003c\/li\u003e\n\u003cli\u003eLiFePO4 Chemistry: Stable lithium iron phosphate battery technology with low self-discharge.\u003c\/li\u003e\n\u003cli\u003eDesigned for Futaba Transmitters: Suitable for a range of compatible Futaba radio systems.\u003c\/li\u003e\n\u003cli\u003eJR\/Futaba Power Connector: Equipped with a transmitter-style discharge plug.\u003c\/li\u003e\n\u003cli\u003eXH Balance Connector: Supports individual cell monitoring with a compatible balance charger.\u003c\/li\u003e\n\u003cli\u003eCompact Battery Pack: Approximately 76 x 41 x 17mm for installation in suitable transmitter battery compartments.\u003c\/li\u003e\n\u003cli\u003eLightweight Construction: Approximately 105g.\u003c\/li\u003e\n\u003cli\u003eRecommended 1C Charging: Maximum recommended charge current of 2.1A.\u003c\/li\u003e\n\u003cli\u003eReusable Rechargeable Design: Practical alternative to disposable batteries in supported radio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ProTek RC\u003c\/li\u003e\n\u003cli\u003eManufacturer Part Number: PTK-5188\u003c\/li\u003e\n\u003cli\u003eBarcode \/ UPC: 610074799733\u003c\/li\u003e\n\u003cli\u003eProduct Type: RC Transmitter Battery Pack\u003c\/li\u003e\n\u003cli\u003eBattery Chemistry: Lithium Iron Phosphate (LiFePO4)\u003c\/li\u003e\n\u003cli\u003eCell Configuration: 2S \/ 2 Cells in Series\u003c\/li\u003e\n\u003cli\u003eNominal Voltage: 6.6V\u003c\/li\u003e\n\u003cli\u003eCapacity: 2100mAh\u003c\/li\u003e\n\u003cli\u003eNominal Energy: Approximately 13.86Wh\u003c\/li\u003e\n\u003cli\u003eRecommended Maximum Charge Rate: 1C\u003c\/li\u003e\n\u003cli\u003eRecommended Maximum Charge Current: 2.1A\u003c\/li\u003e\n\u003cli\u003eDischarge Connector: JR\/Futaba Style\u003c\/li\u003e\n\u003cli\u003eBalance Connector: XH Type\u003c\/li\u003e\n\u003cli\u003eCase Type: Soft Case\u003c\/li\u003e\n\u003cli\u003eLength: 76mm\u003c\/li\u003e\n\u003cli\u003eWidth: 41mm\u003c\/li\u003e\n\u003cli\u003eHeight: 17mm\u003c\/li\u003e\n\u003cli\u003eWeight: Approximately 105g\u003c\/li\u003e\n\u003cli\u003eApplication: Compatible Futaba RC Radio Transmitters\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 Battery Pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTransmitter Compatibility\u003c\/h3\u003e\n\u003cp\u003ePTK-5188 is listed by specialist RC retailers for selected Futaba transmitters, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFutaba 3PV\u003c\/li\u003e\n\u003cli\u003eFutaba 4PK\u003c\/li\u003e\n\u003cli\u003eFutaba 4PM\u003c\/li\u003e\n\u003cli\u003eFutaba 4PV\u003c\/li\u003e\n\u003cli\u003eFutaba 4PLS\u003c\/li\u003e\n\u003cli\u003eFutaba 4PX\u003c\/li\u003e\n\u003cli\u003eFutaba 7PX\u003c\/li\u003e\n\u003cli\u003eFutaba 7PXR\u003c\/li\u003e\n\u003cli\u003eSelected Futaba 10PX, 16SZ and 18SZ configurations, subject to model-specific verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatibility depends on the exact transmitter model and version, supported battery chemistry, battery compartment dimensions and connector arrangement. Check the transmitter manual before ordering.\u003c\/p\u003e\n\u003ch3\u003eIncludes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ProTek RC 6.6V 2100mAh 2S LiFe Futaba Transmitter Battery Pack PTK-5188\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRequired to Complete\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Futaba Transmitter\u003c\/li\u003e\n\u003cli\u003eBattery Charger with Dedicated 2S LiFePO4 Balance Charging Mode\u003c\/li\u003e\n\u003cli\u003eSuitable Charging Leads or Adapters if Required by the Charger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Futaba transmitters are compatible with ProTek RC PTK-5188?\u003c\/strong\u003e Retailers list compatibility with models including the Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX and 7PXR. Additional models may be supported, but confirm the exact transmitter's voltage, battery compartment and connector before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a LiPo or LiFe battery?\u003c\/strong\u003e PTK-5188 uses LiFePO4 chemistry, not conventional LiPo chemistry. Its nominal voltage is 6.6V across two cells, and it requires the appropriate LiFe charging program.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I charge this battery using a standard LiPo charger?\u003c\/strong\u003e Only if the charger has a dedicated LiFePO4 charging mode suitable for a 2S pack. A charger restricted to standard LiPo, NiMH or NiCd charging is not suitable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat charging current should I use?\u003c\/strong\u003e The recommended maximum charge rate is 1C, which equals 2.1A for this 2100mAh battery. A lower compatible charge current may also be used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the battery fit my transmitter battery compartment?\u003c\/strong\u003e The pack measures approximately 76 x 41 x 17mm. Check the available space, connector orientation and wire clearance in your transmitter before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this battery replace four AA batteries in my Futaba transmitter?\u003c\/strong\u003e It may be a suitable rechargeable alternative in compatible Futaba models, but not every AA-powered transmitter accepts a 6.6V LiFe battery. Confirm the manufacturer's supported battery types and any required battery settings first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the battery include a charger?\u003c\/strong\u003e No. This product includes the rechargeable battery pack only. A suitable 2S LiFe-compatible balance charger and any necessary charging leads are purchased separately.\u003c\/p\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContains one ProTek RC PTK-5188 transmitter battery pack only.\u003c\/li\u003e\n\u003cli\u003eDesigned for compatible Futaba transmitters; not a universal transmitter battery.\u003c\/li\u003e\n\u003cli\u003eCheck voltage compatibility, physical dimensions and connector polarity before connecting the battery.\u003c\/li\u003e\n\u003cli\u003eUse a charger with a dedicated 2S LiFePO4 charging program.\u003c\/li\u003e\n\u003cli\u003eDo not select a standard LiPo charging program unless the charger specifically supports LiFe chemistry through that setting.\u003c\/li\u003e\n\u003cli\u003eDo not exceed the recommended 2.1A charge current.\u003c\/li\u003e\n\u003cli\u003eBalance charge using the appropriate XH connector and compatible charging equipment.\u003c\/li\u003e\n\u003cli\u003eProtect the battery from short circuits, punctures, crushing, excessive heat and moisture.\u003c\/li\u003e\n\u003cli\u003eNever charge a damaged, swollen or abnormally hot battery.\u003c\/li\u003e\n\u003cli\u003eDo not over-discharge the pack. ProTek recommends avoiding discharge below 33% capacity during the first 20 cycles and below 2.5V per cell thereafter.\u003c\/li\u003e\n\u003cli\u003eDisconnect or remove the battery when the transmitter is not being used for extended periods to reduce the risk of accidental over-discharge.\u003c\/li\u003e\n\u003cli\u003eLiFePO4 chemistry is generally more thermally stable than conventional LiPo, but incorrect charging or physical damage can still create fire and injury hazards.\u003c\/li\u003e\n\u003cli\u003eLithium battery transport and carrier restrictions may apply.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProTek RC","offers":[{"title":"Default Title","offer_id":53860914725176,"sku":"PTK-5188","price":51.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/2849\/9768\/files\/ProTek_RC_6.6V_2100mAh_LiFe_Futaba_Transmitter_Battery_PTK-5188.png?v=1795061168","url":"https:\/\/ozrc.com.au\/products\/protek-rc-6-6v-2100mah-life-futaba-transmitter-battery-ptk-5188","provider":"OZRC","version":"1.0","type":"link"}