Force 32 1/8 Buggy/Truggy Nitro Engine w/Pullstart FE-3201

Force 32 1/8 Buggy/Truggy Nitro Engine w/Pullstart FE-3201.

Features

• Unique pull start pin design allows conversion to non-pull start by purchasing different rear engine covers- ABC cylinder & piston set-Aluminium piston, Brass cylinder liner
• with Chrome plating on the cylinder
• Improved porting for higher torque and RPM power
• Competition slide valve carburettor
• Oversized cylinder head for efficient cooling.

Includes

• Ofna Force .32 cu in (5.2cc) Pull Start Nitro Engine with instruction sheet
• Rubber exhaust gasket
• Collet and 3x6mm socket head screw to hold clutch assembly to crankshaft

Requires

• Fuel: Car fuel with 20% nitro content
• Glow Plug: Long, without idle bar.

Specifications

• Displacement: .32 cu in (5.2cc)
• Exhaust: Rear
• Bore: 19.5mm
• Stroke: 17.5mm
• Liner : ABC
• Number of Ports: 6
• Crankshaft: 14.0mm SG (pilot) shaft
• Piston: Fully CNC-machined aluminium alloy
• Connecting Rod: 7075 aluminium double bushing
• Claimed Output: 3 @ 33,000RPM
• Max RPM: 36,000
• Needle Settings: Main: 3-3-1/2 turns from closed. Low Speed: Flush with ball end
• Barrel Stop Screws: 1/16" gap to start new engine
• Distance Between Mounting Holes Same Side: 0.83" (21mm)
• Distance Between Mounting Holes Opposite Side: 1.5" (38mm)
• Height Bottom of Mounting Tabs to Top of Cylinder Head:4" (102mm)
• Width at Mounting Tabs: 1.8" (45.8mm)
• Width of Crankcase Below Mounting Tabs: 1.2" (30mm)
• Distance from Pull Start to Front Bearing: 3.3" (84.3mm)
• Distance from Centre of Engine to Front Bearing: 1.8" (45mm)
• Distance from Centre of Engine to Pull Start: 1.5" (39mm)