HPI RS4 Sport 3 Drift Vaughn Gittin Jr. Fun-Haver Ford Mustang 1/10 4WD Electric RC Car 115984

The super realistic Ford Mustang RTR Spec 5 body is coupled with a set of replica Tech 7 wheels wrapped with official Nitto RT05 replica tires for over the top scale realism! Under the hood, this 1/10th scale Mustang is equipped with the latest HPI Racing Touring Car chassis, the RS4 Sport 3. With full time shaft driven 4WD, a fully sealed drivetrain, waterproof 2.4 GHz electronics/radio gear, fully independent double wishbone suspension and adjustable oil filled shocks it’s Ready to Rock in any condition.

This RS4 Sport 3 Drift features the latest Ford Mustang styling, tuned and tweaked by drift champion Vaughn Gittin Jr. to become the awesome Ford Mustang RTR Spec 5. The car is also fitted with replica green RTR Tech 7 wheels wrapped with great-looking street tires, so it's ready to hit the streets right out of the box!

Features

The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel moulded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

One of the ways we gave the RS4 Sport 3 Drift the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low centre of gravity for optimum cornering capabilities.

The RS4 Sport 3 Drift features a versatile electronic speed controller that can be used with modern lithium-polymer (LiPo) or nickel-metal hydride (NiMH) batteries. Please note a LiPo adapter plug is not included, your model shop will be able to provide one.

The RS4 Sport 3 Drift chassis can fit lithium-polymer (LiPo) and nickel-metal hydride (NiMH) packs of various sizes, including the extra-long 7-cell NiMH packs. Whatever your power requirements, it can hold it all! A thick hook-and-loop strap holds the pack securely in place, and a simple battery block screws into place to allow you to adjust the weight distribution forward or backward for extra steering or acceleration.

The RS4 Sport 3 Drift features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.

The drivetrain of all the RS4 Sport 3 Drift models features the motor mounted longitudinally in the moulded chassis, next to the long driveshaft that goes down the centre of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.

The central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car.

Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service.

Bevel gear differentials at each end of the car transfer power from the driveshaft to the dog bones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.

The suspension of the RS4 Sport 3 Drift uses the race-proven double-wishbone suspension design, similar to a full-scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll centre front and rear with the racing-style vertical ball stud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.

The RS4 Sport 3 Drift is fitted with a set composite coil over-style oil-filled shocks, just like what you'd see on a real race car! The fully adjustable shocks are fully tuneable to provide the optimum chassis performance on a wide variety of road surfaces. The ride height is quickly adjustable by using the threaded shock collars. Further tuning adjustments are also possible by changing the springs and shock oil weight.

The RS4 Sport 3 Drift front end uses the strong C-hub style suspension seen on the latest RC touring cars, with a vertical ball stud camber mount that lets you change the front end roll centre – which is a critical racing adjustment that allows the RS4 Sport 3 Drift to be a step above other sport-level RC touring cars. The suspension arm also features multiple shock mounting holes for easy shock angle adjustment.

The rear hub is fitted with a vertical ball stud style adjustment that allows easy adjustment of the rear roll centre. Moving the ball stud up or down with the optional spacers changes the traction characteristics of the rear end as the car goes through the turns. The suspension arm also features 3 different shock mounting holes for easy shock angle adjustment.

The performance tested adjustable double bell crank system provides optimum steering precision at all speeds. A metal drag link plate connects the cranks for extra durability, the additional drag link mounting positions also allows for Ackermann angle adjustments.

Fitted to the HPI SS20WR water-resistant servo is an adjustable multipiece servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo from the impact!

The cast aluminium cam-style motor mount holds the motor in place for a secure pinion/spur connection. Two screws hold the cam firmly in position on the mount, and cooling fins on the lateral support aid heat dissipation to keep the motor running as efficiently as possible.

The built in rear end chassis diffuser element smooths out the air flow underneath the chassis for maximum aero efficiency.

The RS4 Sport 3 Drift is fully fitted with a set of rubber-sealed ball bearings for maximum efficiency. The rubber seals keeps the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline.

To protect the front suspension, chassis and body from impacts big and small, an extra thick foam bumper is securely fastened to the front of the RS4 Sport 3 Drift. CUSTOMIZE YOUR LOOK

A huge variety of option bodies, wheels and tires from HPI lets you fully customize the style of your RS4 Sport 3 to suit your style.

Requires

Nothing! Everything from the battery, charger and AA batteries is included.