Kyosho MINI-Z Super Low Height Slick Tyres 40 Degree 4 Pack MZW40-40
Couldn't load pickup availability
The Kyosho MZW40-40 Super Low Height Slick Tyres are genuine performance option tyres for compatible Kyosho MINI-Z 1/28 scale RC racing cars. Featuring a 40-degree rubber compound and an ultra-low-profile slick tread design, these tyres are intended for racers who prefer a smaller tyre diameter from the start rather than wearing down a conventional-height tyre.
When installed on a compatible Kyosho multi-offset wheel, the tyres have an approximate outside diameter of 22.6mm. Their super low height helps maintain a compact tyre profile, making them useful for fine-tuning front-end handling and ride height on suitable MINI-Z on-road racing setups.
The smooth slick tread is intended for suitable indoor and on-road racing surfaces. The 40-degree compound provides an alternative to softer 20-degree and 30-degree options, allowing drivers to experiment with tyre characteristics to suit their track conditions and driving preferences.
These are narrow MINI-Z tyres, commonly used in front-wheel applications. Each pack contains four tyres of the same specification.
Installation note: Kyosho recommends using double-sided tyre tape because the thin, low-profile rubber may loosen or slip on the wheel. Fit the tyres securely and check that they remain seated before driving.
Features
- Genuine Kyosho Option Part: Manufacturer part number MZW40-40.
- Super Low Height Design: Very low-profile tyres for compatible MINI-Z racing wheels.
- 40-Degree Compound: Provides a firmer compound option compared with lower-numbered tyres in the range.
- Slick Tread Pattern: Smooth racing surface for suitable on-road tracks.
- Narrow Tyre Profile: Commonly used for front tyre applications on MINI-Z racers.
- Approximately 22.6mm Mounted Diameter: Based on installation on a compatible multi-offset wheel.
- Performance Tuning Option: Allows drivers to experiment with tyre profile and compound selection.
- Four Tyres Per Pack: Convenient quantity for maintenance and replacement.
- Miniature Racing Application: Designed for compatible Kyosho MINI-Z on-road platforms.
- Manufacturer-Recommend Tyre Tape: Helps prevent the thin tyres from slipping off the wheels.
Specifications
- Brand: Kyosho
- Product Range: MINI-Z Racer
- Manufacturer Part Number: MZW40-40
- OZRC SKU: KYO-MZW40-40
- Barcode / JAN: 4548565417247
- Product Type: RC Racing Slick Tyres
- Tyre Profile: Super Low Height
- Compound Rating: 40 Degree / 40°
- Tread Pattern: Slick / Smooth
- Tyre Width Category: Narrow
- Nominal Tyre Width: Approximately 8.5mm
- Approximate Mounted Outside Diameter: 22.6mm on a Compatible Multi-Offset Wheel
- Vehicle Application: Compatible Kyosho MINI-Z On-Road Racing Cars
- Typical Mounting Position: Front / Narrow Wheel Applications
- Quantity: 4 Tyres
- Tyre Tape: Recommended; Sold Separately
Vehicle Compatibility
- Kyosho MINI-Z MR-03 – With Compatible Narrow Wheels
- Kyosho MINI-Z MR-04 – With Compatible Narrow Wheels
- Kyosho MINI-Z MR-04 EVO2 – With Compatible Narrow Wheels
- Other MINI-Z On-Road Platforms – Subject to Wheel Width, Tyre Fit and Chassis Clearance
Compatibility depends on the installed wheel size and tyre configuration. These are narrow slick tyres and should not be confused with wide rear racing tyres. Confirm the correct wheel application before ordering.
Includes
- 4 x Kyosho MINI-Z Super Low Height Slick Tyres – 40-Degree Compound (MZW40-40)
FAQ
What does 40 degree mean on a Kyosho MINI-Z tyre? The 40-degree designation refers to the tyre compound hardness rating, not an operating temperature. It identifies this compound option within Kyosho's MINI-Z racing tyre range.
Are these front or rear MINI-Z tyres? MZW40-40 is a narrow-profile tyre commonly used on compatible MINI-Z front wheels. A specialist MINI-Z retailer identifies the narrow width as approximately 8.5mm, compared with 11mm for wide rear wheels.
How many tyres come in the packet? Each genuine Kyosho MZW40-40 pack contains four tyres of the same 40-degree compound.
What is the diameter of these super low height tyres? Kyosho states an approximate outside diameter of 22.6mm when fitted to a compatible multi-offset wheel. Actual mounted size may vary with the wheel and installation.
Do I need tyre tape? Yes, Kyosho recommends double-sided tyre tape. The super low height design leaves a thin tyre wall, which can make the tyre more likely to slip or come off the wheel without suitable retention.
Will these tyres fit a Kyosho MINI-Z MR-03 or MR-04? They are intended for compatible MINI-Z racing wheels and are used with MINI-Z on-road racing configurations. Confirm that your vehicle has the correct narrow wheels before ordering.
What is the difference between 20, 30 and 40 degree MINI-Z tyres? These numbers identify different rubber compound hardness options. Lower-numbered compounds are generally softer, while higher-numbered compounds are firmer. The best selection depends on the track surface, temperature, wheel position and driving setup.
Do these tyres include wheels? No. The package contains four replacement tyres only. Wheels, double-sided tyre tape and other installation accessories are sold separately.
Important Notes
- Includes four genuine Kyosho MZW40-40 super low height slick tyres.
- 40-degree narrow-profile tyre compound.
- Approximate mounted diameter is 22.6mm on a compatible multi-offset wheel.
- Use suitable double-sided tyre tape to help secure the tyres to the rims.
- Wheels and tyre tape are not included.
- Confirm wheel width and body or chassis clearance before installation.
- Not a universal tyre for every MINI-Z model or wheel configuration.
- Not intended for MINI-Z off-road or crawler applications.
- Check tyres regularly for wear, damage and slipping on the rims.
- Track conditions and setup affect tyre grip and handling.
