MJX Hyper Go 14212 RC Truggy 1/14 4WD Brushless RTR MJX-14212
Couldn't load pickup availability
The MJX Hyper Go 14212 is a complete 1/14 scale 4WD brushless RC truggy designed for fast off-road bashing, combining a 2852 brushless motor, 45A ESC, metal drivetrain components and a 2.4GHz radio system in a compact ready-to-run package
Features
- 1/14 scale 4WD brushless RC truggy
- 2852 brushless motor with aluminium heatsink and cooling fan
- E45P 45A brushless ESC supports 2S to 3S LiPo operation
- Full-time four-wheel drive for improved traction on loose and uneven surfaces
- Metal centre driveshafts and metal CVD components
- Chrome steel transmission gears and metal differential components
- Full ball-bearing drivetrain
- 19 g digital steering servo with metal gears
- T3D 2.4GHz radio system with proportional throttle and steering
- Throttle and steering trim adjustment
- Approximate radio range of 120 metres
- Water-resistant receiver box helps protect electronics from wet grass and light splashes
- Supplied with two painted bodies for a spare or alternate appearance
- Replacement suspension parts, shock springs, body clips and wheelie bar included
Specifications
- Brand: MJX
- Series: Hyper Go
- Model: 14212
- Product Type: RC Truggy
- SKU: MJX-14212
- Barcode: 4897027273397
- Scale: 1/14
- Build Type: RTR
- Drive Type: 4WD
- Motor: 2852 Brushless
- ESC: E45P 45A Brushless
- ESC Battery Support: 2S to 3S LiPo
- Steering Servo: 19 g Digital Metal Gear
- Servo Torque: Approximately 2.2 kg/cm
- Radio System: T3D 2.4GHz
- Radio Range: Approximately 120 m
- Claimed Top Speed: Up to 56 km/h with the specified setup
- Included Battery: 7.4V 3000mAh 25C LiPo
- Approximate Runtime: 13 minutes
- Charging Method: USB charging cable
Includes
- 1 x MJX Hyper Go 14212 1/14 brushless RC truggy
- 1 x T3D 2.4GHz transmitter
- 1 x 7.4V 3000mAh 25C LiPo battery
- 1 x USB charging cable
- 1 x Additional painted body
- Front upper and lower suspension arms
- Replacement shock springs
- Body clips
- Wheelie bar
- Basic tools
FAQ
Is the MJX Hyper Go 14212 ready to run? Yes, the 14212 is supplied as an RTR package with the vehicle, transmitter, LiPo battery, USB charging cable and basic tools, although two AA batteries for the transmitter are required separately
Can the MJX 14212 run on a 3S LiPo battery? The E45P 45A ESC is specified as 2S to 3S capable, but OZRC recommends confirming battery dimensions, connector compatibility and gearing before using an alternative 3S pack
How fast is the MJX Hyper Go 14212? Retailer specifications list a claimed maximum speed of approximately 56 km/h, although actual speed will vary with battery condition, surface, gearing and driving conditions
Are replacement parts available for the MJX 14212? Yes, MJX supplies exploded parts diagrams and replacement components for the Hyper Go range, and the 14212 also includes several spare suspension and body components in the box
Important Notes
- Two AA batteries are required separately for the transmitter
- Claimed speed figures can vary with battery, surface and vehicle setup
- The ESC supports 2S to 3S LiPo operation but alternative batteries must physically fit the battery compartment and use a compatible connector
- Water-resistant electronics do not make the vehicle fully waterproof or suitable for submersion
- Allow the motor and ESC to cool between demanding high-speed runs
- Inspect suspension, drivetrain and wheel hardware after heavy impacts or jumps