ProTek RC 6.6V 2100mAh LiFe Futaba Transmitter Battery PTK-5188
Couldn't load pickup availability
The ProTek RC PTK-5188 LiFe Futaba Transmitter Battery Pack is a 6.6V 2100mAh rechargeable battery designed to power compatible Futaba RC transmitters. Featuring stable LiFePO4 (lithium iron phosphate) chemistry, a compact soft-case design and a JR/Futaba-style power connector, it provides a convenient alternative to disposable transmitter batteries and compatible original rechargeable packs.
The two-cell LiFe battery delivers a nominal 6.6V output with a capacity of 2100mAh, offering consistent power delivery and low self-discharge for RC enthusiasts who want a transmitter battery that retains its charge well between driving sessions.
Designed for a range of Futaba radio systems, PTK-5188 is listed as compatible with models including the 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX and 7PXR, along with selected other Futaba transmitters. Always verify the battery compartment dimensions, connector polarity and transmitter voltage requirements before installation.
The pack measures approximately 76 x 41 x 17mm and weighs 105g. It features a JR/Futaba-style discharge connector and an XH balance connector for charging with a compatible LiFe balance charger.
For battery longevity, ProTek recommends charging at a maximum of 1C, equivalent to 2.1A for this 2100mAh pack. Use a charger with a dedicated 2S LiFePO4 setting; chargers that support only NiMH, NiCd or LiPo charging must not be used without a suitable LiFe charging mode.
Features
- Genuine ProTek RC Battery: Original transmitter battery pack PTK-5188.
- 2100mAh Capacity: Rechargeable power for compatible Futaba radio transmitters.
- 6.6V Nominal Voltage: Two-cell LiFePO4 configuration.
- LiFePO4 Chemistry: Stable lithium iron phosphate battery technology with low self-discharge.
- Designed for Futaba Transmitters: Suitable for a range of compatible Futaba radio systems.
- JR/Futaba Power Connector: Equipped with a transmitter-style discharge plug.
- XH Balance Connector: Supports individual cell monitoring with a compatible balance charger.
- Compact Battery Pack: Approximately 76 x 41 x 17mm for installation in suitable transmitter battery compartments.
- Lightweight Construction: Approximately 105g.
- Recommended 1C Charging: Maximum recommended charge current of 2.1A.
- Reusable Rechargeable Design: Practical alternative to disposable batteries in supported radio systems.
Specifications
- Brand: ProTek RC
- Manufacturer Part Number: PTK-5188
- Barcode / UPC: 610074799733
- Product Type: RC Transmitter Battery Pack
- Battery Chemistry: Lithium Iron Phosphate (LiFePO4)
- Cell Configuration: 2S / 2 Cells in Series
- Nominal Voltage: 6.6V
- Capacity: 2100mAh
- Nominal Energy: Approximately 13.86Wh
- Recommended Maximum Charge Rate: 1C
- Recommended Maximum Charge Current: 2.1A
- Discharge Connector: JR/Futaba Style
- Balance Connector: XH Type
- Case Type: Soft Case
- Length: 76mm
- Width: 41mm
- Height: 17mm
- Weight: Approximately 105g
- Application: Compatible Futaba RC Radio Transmitters
- Quantity: 1 Battery Pack
Transmitter Compatibility
PTK-5188 is listed by specialist RC retailers for selected Futaba transmitters, including:
- Futaba 3PV
- Futaba 4PK
- Futaba 4PM
- Futaba 4PV
- Futaba 4PLS
- Futaba 4PX
- Futaba 7PX
- Futaba 7PXR
- Selected Futaba 10PX, 16SZ and 18SZ configurations, subject to model-specific verification
Compatibility depends on the exact transmitter model and version, supported battery chemistry, battery compartment dimensions and connector arrangement. Check the transmitter manual before ordering.
Includes
- 1 x ProTek RC 6.6V 2100mAh 2S LiFe Futaba Transmitter Battery Pack PTK-5188
Required to Complete
- Compatible Futaba Transmitter
- Battery Charger with Dedicated 2S LiFePO4 Balance Charging Mode
- Suitable Charging Leads or Adapters if Required by the Charger
FAQ
Which Futaba transmitters are compatible with ProTek RC PTK-5188? Retailers list compatibility with models including the Futaba 3PV, 4PK, 4PM, 4PV, 4PLS, 4PX, 7PX and 7PXR. Additional models may be supported, but confirm the exact transmitter's voltage, battery compartment and connector before purchase.
Is this a LiPo or LiFe battery? PTK-5188 uses LiFePO4 chemistry, not conventional LiPo chemistry. Its nominal voltage is 6.6V across two cells, and it requires the appropriate LiFe charging program.
Can I charge this battery using a standard LiPo charger? Only if the charger has a dedicated LiFePO4 charging mode suitable for a 2S pack. A charger restricted to standard LiPo, NiMH or NiCd charging is not suitable.
What charging current should I use? The recommended maximum charge rate is 1C, which equals 2.1A for this 2100mAh battery. A lower compatible charge current may also be used.
Will the battery fit my transmitter battery compartment? The pack measures approximately 76 x 41 x 17mm. Check the available space, connector orientation and wire clearance in your transmitter before purchasing.
Can this battery replace four AA batteries in my Futaba transmitter? It may be a suitable rechargeable alternative in compatible Futaba models, but not every AA-powered transmitter accepts a 6.6V LiFe battery. Confirm the manufacturer's supported battery types and any required battery settings first.
Does the battery include a charger? No. This product includes the rechargeable battery pack only. A suitable 2S LiFe-compatible balance charger and any necessary charging leads are purchased separately.
Important Notes
- Contains one ProTek RC PTK-5188 transmitter battery pack only.
- Designed for compatible Futaba transmitters; not a universal transmitter battery.
- Check voltage compatibility, physical dimensions and connector polarity before connecting the battery.
- Use a charger with a dedicated 2S LiFePO4 charging program.
- Do not select a standard LiPo charging program unless the charger specifically supports LiFe chemistry through that setting.
- Do not exceed the recommended 2.1A charge current.
- Balance charge using the appropriate XH connector and compatible charging equipment.
- Protect the battery from short circuits, punctures, crushing, excessive heat and moisture.
- Never charge a damaged, swollen or abnormally hot battery.
- Do not over-discharge the pack. ProTek recommends avoiding discharge below 33% capacity during the first 20 cycles and below 2.5V per cell thereafter.
- Disconnect or remove the battery when the transmitter is not being used for extended periods to reduce the risk of accidental over-discharge.
- LiFePO4 chemistry is generally more thermally stable than conventional LiPo, but incorrect charging or physical damage can still create fire and injury hazards.
- Lithium battery transport and carrier restrictions may apply.
