Spaz Stix Yellow Fluorescent Airbrush Paint 2oz 59ml SZX02050

Spaz Stix SZX02050 is a translucent Yellow Fluorescent enamel-based airbrush paint formulated for clear polycarbonate RC car and truck bodies. Supplied pre-thinned and ready to spray, it is designed to be applied in several light coats and then backed with Spaz Stix Solid White to develop its bright fluorescent yellow appearance.

Features

• Fluorescent Yellow: Bright translucent colour designed for high-visibility RC body paint schemes
• Translucent Formula: Builds colour through multiple light coats rather than functioning as an opaque solid paint
• White Backing System: Designed to be backed with Spaz Stix Solid White for the intended fluorescent effect
• Airbrush Ready: Pre-thinned and ready to pour directly into an airbrush without additional thinning
• Enamel-Based Formula: High-quality enamel formulation developed for hobby painting
• Polycarbonate Formulation: Designed specifically for clear polycarbonate RC car and truck bodies
• 2oz Bottle: Convenient 59mL size for airbrush application

Specifications

• Brand: Spaz Stix
• Product Type: Fluorescent Airbrush Paint
• Colour: Yellow Fluorescent
• Colour Type: Translucent
• Formula: Enamel Based
• Volume: 2oz / Approx. 59mL
• Application: Airbrush
• Preparation: Pre-Thinned / Ready to Spray
• Primary Surface: Polycarbonate
• Intended Use: RC Car and Truck Bodies
• Required Backer: Spaz Stix Solid White / Backer
• Manufacturer Part Number: SZX02050
• UPC: 739792024535

Includes

• 1 x Spaz Stix Yellow Fluorescent Airbrush Ready Paint 2oz / 59mL Bottle

FAQ

Is Spaz Stix SZX02050 opaque or translucent? SZX02050 is a translucent fluorescent colour. Spaz Stix advises building the colour with several light coats before applying the required white backing paint.

Does Spaz Stix Yellow Fluorescent need a white backer? Yes. Spaz Stix specifies that Yellow Fluorescent must be backed with Solid White / Backer SZX00200 or SZX00209 after an even fluorescent colour has been achieved.

Does SZX02050 need to be thinned before airbrushing? No. SZX02050 is supplied pre-thinned and ready to pour directly into an airbrush and spray.

How should Spaz Stix Yellow Fluorescent be applied? Apply several light coats to gradually develop an even fluorescent layer. Spaz Stix warns that applying too much paint at once can cause runs, cracking and an uneven finish. Finish the fluorescent layer with the specified Solid White backing paint.

Is SZX02050 suitable for clear polycarbonate RC bodies? Yes. Spaz Stix formulates this paint specifically for polycarbonate material, including clear RC car and truck bodies.

Can SZX02050 be used on materials other than polycarbonate? Spaz Stix recommends testing compatibility before using its paints on other surfaces. A scrap piece is useful for confirming adhesion, compatibility and the finished colour before painting the main project.

Important Notes

• Yellow Fluorescent is translucent and requires a white backer for the intended finished colour
• Use Spaz Stix Solid White / Backer SZX00200 or SZX00209 after the fluorescent colour coats
• Apply several light coats rather than one heavy coat
• Paint is supplied pre-thinned and normally requires no additional thinning for airbrush use
• Designed primarily for clear polycarbonate RC bodies
• Test compatibility before applying to other materials
• White backer, airbrush and other painting equipment are not included