Tamiya Nissan R91CP RC Racing Car 1/10 2WD Kit 47531

The Tamiya Nissan R91CP is a 1/10 scale 2WD RC racing car assembly kit recreating the 1992 Daytona-winning Group C prototype, combining a detailed polycarbonate body with a direct-drive chassis, ball differential and high-grip sponge tyres for responsive driving on smooth on-road surfaces.

Features

• Nissan R91CP Replica: Recreates the Nissan prototype that won the 1992 24 Hours of Daytona after its 1991 All-Japan Sports Prototype Championship success
• Limited Edition Re-Release: Returns the classic R91CP RC model originally released in 1992 and previously re-issued in 2012
• Polycarbonate Body: Lightweight aerodynamic shell captures the low and wide proportions of the full-size Nissan R91CP
• Detailed Exterior Parts: Separate rear induction pod, driver-side mirror, windscreen wiper and headlight components add scale detail
• Detailed Cockpit: Interior includes a steering wheel, shift lever and driver figure with three marking options
• Direct-Drive 2WD Chassis: Rear-wheel-drive layout transfers motor power directly through the spur gear for crisp throttle response
• Ball Differential: Built into the spur gear assembly to provide a limited-slip differential effect
• Composite Chassis: ABS bathtub frame, front and rear space frames and FRP plate construction provide a rigid foundation
• Adjustable Ground Clearance: Spacer setup provides two front and three rear ground-clearance positions
• Front King Pin Suspension: Independent coil-sprung king pin front suspension provides compact and responsive handling
• FRP T-Bar Rear Suspension: Three-point rigid rear suspension uses a 1.5mm FRP T-bar with a CVA oil damper
• Sponge Tyres: Wider rear sponge tyres provide high grip on smooth asphalt and carpet-style driving surfaces
• Sport-Tuned Motor Included: Supplied with a Tamiya Sport-Tuned brushed motor for the direct-drive chassis
• Decals and Masks Included: Sponsor graphics, racing numbers and masking stickers are supplied for completing the body

Specifications

• Brand: Tamiya
• Model: Nissan R91CP
• Product Type: RC Racing Car
• Scale: 1/10
• Build Type: Assembly Kit
• Drive: 2WD / Rear-Wheel Drive
• Drivetrain: Direct Drive
• Differential: Ball Differential
• Motor: Tamiya Sport-Tuned Brushed Motor
• Chassis: ABS Bathtub with Space Frames and FRP Plate
• Front Suspension: Independent Coil-Spring King Pin
• Rear Suspension: 3-Point with 1.5mm FRP T-Bar and CVA Oil Damper
• Gear Ratio: 5.00:1
• Length: 480mm
• Width: 204mm
• Height: 109mm
• Wheelbase: 270mm
• Front Tyre Size: 28mm Wide / 64mm Diameter
• Rear Tyre Size: 45mm Wide / 68mm Diameter
• Tyre Type: Sponge
• Body Material: Polycarbonate
• Manufacturer Item Number: 47531
• Product Code: 47531-000
• Barcode / EAN: 4950344475315

Includes

• 1 x Tamiya Nissan R91CP 1/10 RC Assembly Kit
• 1 x Polycarbonate Nissan R91CP Body Set
• 1 x Detailed Driver Cockpit
• 1 x Rear Wing Assembly
• 1 x Front and Rear Sponge Tyre Set
• 1 x Tamiya Sport-Tuned Brushed Motor
• 1 x Sponsor and Racing Number Sticker Set
• 1 x Window and Headlight Masking Sticker Set

FAQ

Is the Tamiya Nissan R91CP 47531 ready to run? No. Tamiya 47531 is an assembly kit that requires building, painting and installation of the separately purchased radio and electronic equipment before it can be driven.

What electronics are required to complete Tamiya 47531? A compatible 2-channel radio system, receiver, steering servo and electronic speed controller are required separately. A suitable 7.2V or 7.4V drive battery, charger and transmitter batteries are also required.

Does the Tamiya Nissan R91CP kit include a motor? Yes. The 2026 Tamiya 47531 specification includes a Sport-Tuned brushed motor.

What surfaces suit the Tamiya R91CP? The direct-drive chassis and sponge tyres are best suited to smooth on-road surfaces such as prepared asphalt and carpet rather than rough outdoor terrain.

Important Notes

• This is an assembly kit and is not supplied ready to drive
• 2-channel radio system, receiver, steering servo and ESC are required separately
• Suitable 7.2V or 7.4V drive battery and compatible charger are required separately
• Transmitter batteries are required separately
• The polycarbonate body requires suitable Tamiya PS paint, with additional model paints required for detailed parts as desired
• Tamiya identifies item 47531 as a limited-edition 2026 re-release