Yokomo SP-02D V2 Purple 12kg Digital Drift Servo SP-02DV2P

Upgrade your RC drift car's steering precision with the Yokomo SP-02D V2 Low Profile Programmable Digital Steering Servo in Purple. Designed specifically for 1/10 scale rear-wheel-drive RC drifting, this high-response coreless servo combines smooth steering movement, programmable operating characteristics and advanced hunting suppression to help maintain consistent control through corners and drift transitions.

Delivering 10kg-cm of torque at 4.8V and 12kg-cm at 6.0V, the SP-02DV2P offers a balanced combination of steering power and responsiveness. Its durable titanium and aluminium metal gear train, aluminium centre case and compact low-profile construction make it a practical steering upgrade for compatible Yokomo, MST and other RC drift chassis.

With a compatible Yokomo servo programmer, drivers can customise steering characteristics and hunting suppression to suit their driving style, steering gyro and track conditions. The distinctive purple anodised centre case adds a premium finishing touch to custom drift builds.

Features

• Drift-Specific Design: Developed by Yokomo for precise steering control in rear-wheel-drive RC drift cars.
• Programmable Digital Servo: Allows adjustment of supported operating characteristics using compatible Yokomo programming equipment.
• High-Response Coreless Motor: Provides quick, smooth steering movements for controlled drifting and responsive countersteering.
• Up to 12kg-cm Torque: Rated at 10kg-cm at 4.8V and 12kg-cm at 6.0V.
• Hunting Suppression: Helps reduce unwanted steering oscillation caused by interaction between the servo and drift gyro.
• Customisable Steering Behaviour: Allows drivers to fine-tune the servo for their preferred steering feel and driving conditions.
• Low-Profile Construction: Compact 26.1mm height suits many compatible 1/10 scale drift chassis.
• Full Metal Gear Train: Titanium and aluminium gear components provide strength and durability under steering loads.
• Aluminium Centre Case: Metal centre housing promotes heat dissipation during operation.
• Purple Anodised Finish: Distinctive metallic appearance complements matching RC chassis and electronics.
• 25T Futaba-Type Output Spline: Designed for compatible 25-tooth servo horns and steering linkages.
• Lightweight Design: Weighs approximately 48g for a compact steering installation.
• Yokomo Drift Chassis Compatibility: Listed by Yokomo for numerous YD-2 and other compatible drift platforms.
• Suitable for Different Skill Levels: Factory operating characteristics provide a starting point, with additional tuning available through optional programming.

Specifications

• Brand: Yokomo
• Product Series: SP-02D Drift Spec V2
• Manufacturer Part Number: SP-02DV2P
• SKU: SP-02DV2P
• Product Type: Programmable Digital Steering Servo
• Application: 1/10 Scale RWD RC Drift Cars
• Colour: Purple
• Servo Profile: Low Profile
• Motor Type: Coreless
• Operating Voltage: 4.8V to 6.0V DC
• Rated Torque at 4.8V: 10kg-cm
• Rated Torque at 6.0V: 12kg-cm
• Length: 40.8mm
• Width: 20.2mm
• Height: 26.1mm
• Weight: Approximately 48g
• Gear Train: Titanium and Aluminium Metal Gears
• Final Gear: Aluminium
• Output Spline: 25T Futaba-Type
• Case Construction: Aluminium Centre Case
• Hunting Suppression: Yes
• Programmable: Yes, with Compatible Yokomo Programming Equipment
• Manufacturer-Listed USB Programmer: Yokomo SP-USBP, Sold Separately
• Package Quantity: 1 Servo

Includes

• 1 x Yokomo SP-02D V2 Low Profile Programmable Digital Steering Servo in Purple (SP-02DV2P)

FAQ

Is the Yokomo SP-02DV2P designed for RC drifting? Yes. The SP-02D V2 is developed specifically for rear-wheel-drive RC drifting. Its coreless motor, programmable steering characteristics and hunting suppression help provide smooth, predictable steering control.

How much torque does the SP-02D V2 Purple servo produce? The published ratings are 10kg-cm at 4.8V and 12kg-cm at 6.0V. Actual steering performance depends on supply voltage, steering load and vehicle setup.

Can the Yokomo SP-02DV2P run at 7.4V? No. The published operating range for this model is 4.8V to 6.0V. It should not be connected to a 7.4V BEC output or directly to a 2S LiPo battery. If your setup uses a higher-voltage servo supply, choose a servo specifically rated for that voltage.

What is the difference between the SP-02D V2 and SP-03D V2? The SP-02D V2 uses a coreless motor and is rated for up to 6.0V with 12kg-cm torque. The higher-spec SP-03D V2 uses a brushless motor and supports up to 7.4V with 18kg-cm torque. Both offer programmable drift-oriented steering characteristics.

What is hunting suppression? Hunting suppression helps minimise rapid steering oscillation that can occur when a drift gyro repeatedly corrects the servo's position. Adjusting this function can improve steering stability when using compatible gyro systems.

Can I program the Yokomo SP-02D V2? Yes. Yokomo lists the SP-USBP USB programmer and SP-03DPC-1 program card for compatible SP-02D and SP-03D servo programming. These accessories are sold separately.

Will this servo fit a Yokomo YD-2 or MST RMX drift chassis? Yokomo lists numerous YD-2 chassis among the supported applications. Installation in other compatible 1/10 scale drift chassis, including suitable MST platforms, depends on servo mounting dimensions, steering linkage, output spline and receiver power supply.

Which servo horn does it use? The SP-02DV2P uses a 25T Futaba-type output spline. Choose a compatible servo horn with appropriate linkage geometry and clearance.

Does the servo include a drift gyro or programmer? No. The package contains one steering servo. A drift gyro, servo programmer and other installation accessories are not confirmed as included.

Important Notes

• This listing is for the Purple SP-02DV2P variant.
• Maximum published operating voltage is 6.0V. Do not confuse this model with the 7.4V-compatible SP-03D V2 brushless servo.
• Use a suitably regulated receiver or ESC BEC supply within the specified voltage range.
• Check the 40.8 x 20.2 x 26.1mm dimensions and mounting arrangement before purchasing.
• Verify 25T Futaba-type servo horn compatibility with your steering system.
• Custom programming requires compatible Yokomo equipment, sold separately.
• Check steering endpoints and ensure the linkage does not bind at full lock.
• Adjust gyro gain and hunting suppression together to minimise steering oscillation.
• Servo horn, drift gyro, programmer and RC vehicle are not confirmed as included.
• This is a digital coreless servo, not a brushless servo.