HobbyPlus CR18P Pro Juice Up RC Crawler 1/18 4WD RTR Yellow HBP1810360-JUYW CR-18P

HobbyPlus HBP1810360-JUYW CR18P Pro Juice Up Edition is a 1/18 brushless 4WD RC crawler supplied ready to run in yellow. Built for technical crawling, it combines a Hobbywing 3500KV outrunner brushless system, front overdrive gearing, optional 27% rear underdrive gearing, brass weight components, portal axles and 68mm competition-spec super-soft tyres with a compact low-centre-of-gravity chassis.

Features

• Hobbywing Brushless Power: 1621 3500KV outrunner motor paired with a waterproof Hobbywing Mini 24 brushless ESC
• 2S–3S Power System: Brushless electronics support compatible 2S and 3S LiPo batteries
• 3S Battery Included: Supplied with an 11.1V 360mAh 3S LiPo battery and USB charger
• Single-Speed EVO Transmission: Removes the shift servo and two-speed hardware to reduce weight and lower the centre of gravity
• Full-Lock 4WD: All-metal drivetrain gearing provides permanent four-wheel drive for technical crawling
• Front Overdrive Gearing: Increases front wheel speed relative to the rear to support climbing and turning performance
• Optional Rear Underdrive: Includes a 27% rear underdrive ring and pinion gear set for additional drivetrain tuning
• HD Portal Stub Axles: Revised portal drivetrain components use larger 1.5mm drive pins
• HD Plastic Driveshafts: Reinforced driveshaft design supports the upgraded brushless drivetrain
• Brass Front Wheel Hexes: Oversized brass wheel hexes are included for the front axle to add weight low and forward
• Front and Rear Brass Wheel Weights: Included brass weights provide additional low-mounted mass for crawling setup
• 56/44 Weight Distribution: Factory specification places approximately 56% of the vehicle weight at the front and 44% at the rear
• Deep Star Beadlock Wheels: Plastic beadlock wheels mechanically retain the tyres and incorporate brass rings
• 68mm Competition-Spec Tyres: Super-soft rubber compound provides a large footprint for technical crawling
• 5° Performance Chassis: Angled chassis design supports the low-centre-of-gravity crawler layout
• Servo-On-Axle Steering: SOA configuration positions the steering servo directly on the front axle
• Big-Bore Oil-Filled Shocks: Coilover shocks with aluminium caps provide controlled suspension movement
• Pinched LCG Body: Lightweight body design provides tyre clearance while keeping body mass low

Specifications

• Brand: HobbyPlus
• Series: CR18P Pro
• Edition: Juice Up
• Product Type: RC Rock Crawler
• Scale: 1/18
• Colour: Yellow
• Build Type: Ready-To-Run
• Drive Type: 4WD
• Drivetrain: Full-Lock 4WD with All-Metal Gearing
• Power System: Brushless
• Motor: Hobbywing 1621 Brushless Outrunner
• Motor KV: 3500KV
• Motor Battery Compatibility: 2S–3S LiPo
• ESC: Hobbywing Mini 24 Brushless
• ESC Battery Compatibility: 2S–3S LiPo
• Transmission: Single-Speed EVO
• Front Axle: Overdrive Portal Axle
• Rear Axle: Standard with Optional 27% Underdrive Gearing Included
• Weight Distribution: Approx. 56% Front / 44% Rear
• Steering Configuration: Servo On Axle
• Shocks: Big-Bore Oil-Filled Coilover with Aluminium Caps
• Wheels: Deep Star Internal Beadlock with Brass Rings
• Tyre Diameter: 68mm
• Tyre Compound: Competition-Spec Super Soft Rubber
• Transmitter: Flysky 2.4GHz 4-Channel ANT Protocol
• Receiver: 4-Channel PPX4 Grade Water-Resistant
• Battery: 11.1V 360mAh 3S LiPo
• Charger: 3S USB Charger with Indicator
• Length: 225mm
• Width: 138mm
• Height: 98mm
• Wheelbase: 160mm
• Weight: Approx. 475g
• Manufacturer Part Number: HBP1810360-JUYW
• GTIN: 8101005149762

Includes

• 1 x HobbyPlus CR18P Pro Juice Up Edition 1/18 Brushless 4WD Crawler Yellow
• 1 x Hobbywing 1621 3500KV Brushless Outrunner Motor Installed
• 1 x Hobbywing Mini 24 Brushless ESC Installed
• 1 x Steering Servo Installed
• 1 x Flysky 2.4GHz 4-Channel Radio System
• 1 x 11.1V 360mAh 3S LiPo Battery
• 1 x 3S USB LiPo Charger with Indicator
• 1 x Set of Oversized Brass Front Wheel Hexes
• 1 x Set of Front and Rear Brass Wheel Weights
• 1 x Optional 27% Rear Underdrive Ring and Pinion Gear Set
• 1 x Instruction Manual

Required To Complete

• Transmitter Batteries
• Suitable USB Power Source for the Included Charger

FAQ

Is the HobbyPlus CR18P Pro Juice Up brushed or brushless? The Juice Up Edition is brushless. HBP1810360-JUYW uses a Hobbywing 1621 3500KV outrunner motor with a Hobbywing Mini 24 brushless ESC.

Does HBP1810360-JUYW include a battery and charger? Yes. The RTR package includes an 11.1V 360mAh 3S LiPo battery and a 3S USB charger with indicator.

Can the CR18P Pro Juice Up run on 2S? Yes. HobbyPlus specifies the Hobbywing power system for 2S–3S operation, while the RTR package includes a 3S 11.1V 360mAh LiPo battery.

Does the Juice Up Edition have a two-speed transmission? No. The Juice Up uses a single-speed EVO transmission. Removing the shifting servo and associated two-speed hardware reduces weight and lowers the centre of gravity.

Does the CR18P Pro Juice Up have front overdrive? Yes. The front axle uses overdrive gearing to increase front wheel speed relative to the rear, which can assist with climbing and turning on technical terrain.

Is the rear 27% underdrive gearing factory installed? HobbyPlus describes the 27% rear underdrive ring and pinion as an included tuning set. It should therefore not be assumed to be factory installed without checking the vehicle setup.

What brass parts are included? HobbyPlus specifies oversized brass wheel hexes for the front axle plus brass wheel weights for both the front and rear.

Are the wheels beadlock? Yes. The Juice Up Edition uses Deep Star plastic beadlock wheels with integrated brass rings, allowing the tyres to be mechanically retained on the wheels.

How large are the tyres? HobbyPlus specifies 68mm competition-spec super-soft rubber tyres for the CR18P Pro Juice Up Edition.

What is the difference between the Juice Up and EVO Pro? The Juice Up replaces the EVO Pro's two-speed brushed drivetrain with a single-speed Hobbywing brushless system, supports 2S–3S LiPo power and includes additional brass and drivetrain tuning components.

Important Notes

• The optional 27% rear underdrive ring and pinion gear set is included as a tuning component and should not be assumed to be factory installed
• HobbyPlus manufacturer specifications list dimensions of 225mm long, 138mm wide, 98mm high, 160mm wheelbase and approximately 475g
• Transmitter batteries are required separately
• Follow appropriate LiPo charging, storage and handling procedures