Tamiya Lamborghini Cheetah 2026 RC Off-Road Car Kit 1/12 58754-600

ETA unavailable
SKU: 58754-600
$379.95
✉️ Notify me when available!
Awesome! You'll be notified when this item is back in stock.
Please enter a valid email address.
Checking status...

Ask the experts Staff

The Tamiya Lamborghini Cheetah (2026) is a 1/12 scale electric RC off-road car assembly kit inspired by Lamborghini's experimental 1977 military vehicle prototype. Recreating Tamiya's original 1978 RC model with modern refinements, this distinctive rear-wheel-drive kit features a duralumin chassis, independent torsion bar suspension, semi-pneumatic tyres and a detailed Desert Yellow hard-plastic body.

The Australian-market 58754-600 kit includes a Type 540 brushed motor and Hobbywing THW 1060 electronic speed controller. A compatible radio system, steering servo, drive battery, charger and modelling paints are required separately.

First presented at the 1977 Geneva Motor Show, the full-size Lamborghini Cheetah was developed as an all-terrain military vehicle through a collaboration with Mobility Technology International. Its unusual rear-mounted 5.9-litre Chrysler V8 and rugged, doorless design make it one of Lamborghini's most distinctive prototypes.

Tamiya's model captures the Cheetah's angular styling with a tough styrene plastic body moulded in Desert Yellow. The detailed interior features seats, dashboard instruments, steering wheel, fire extinguisher and a driver figure. Additional scale accessories include a front winch, bumper shackles, rear jerry cans, shovel, axe and mesh detailing.

The lightweight U-shaped duralumin chassis positions the battery lengthwise in the centre, with the motor mounted at the rear. Separate duralumin equipment trays accommodate the receiver and speed controller, while the enclosed gearbox helps protect the transmission from dust and small stones.

Four-wheel independent double-wishbone suspension uses adjustable longitudinal metal torsion bar springs. Updated semi-pneumatic tyres feature a flat chevron tread pattern and fit onto three-piece wheels secured to metal hubs with five screws each. A duralumin front underguard provides additional protection during off-road driving.

Combining vintage Tamiya engineering with detailed scale modelling, the Lamborghini Cheetah (2026) is well suited to collectors, experienced kit builders and RC enthusiasts looking for an unusual military-inspired off-road vehicle.

Features

  • Classic Tamiya Re-Release: Updated recreation of the original Lamborghini Cheetah RC model introduced in 1978.
  • 1/12 Scale Assembly Kit: Detailed build-it-yourself electric RC off-road vehicle.
  • Lamborghini Prototype Styling: Faithfully recreates the distinctive 1977 doorless all-terrain vehicle.
  • Desert Yellow Body: Durable styrene plastic shell moulded in colour and ready for additional detailing.
  • Detailed Scale Interior: Includes dashboard, seating, steering wheel, fire extinguisher and driver figure.
  • Realistic Exterior Accessories: Features front winch detailing, bumper shackles, rear equipment and mesh panels.
  • Rear-Wheel Drive: Traditional 2WD configuration with a rear-mounted brushed motor.
  • Duralumin Chassis: Lightweight U-shaped metal chassis plate provides a rigid mechanical foundation.
  • Central Battery Position: Lengthwise battery placement supports balanced chassis packaging.
  • Sealed Gearbox: Helps keep dust and small stones away from transmission components.
  • Independent Double-Wishbone Suspension: H-shaped upper and lower suspension arms at all four wheels.
  • Adjustable Metal Torsion Bar Springs: Four longitudinal suspension springs allow mechanical setup adjustments.
  • Semi-Pneumatic Chevron Tyres: Updated tyre construction with a flat chevron tread pattern.
  • Three-Piece Wheels: Secured to metal wheel hubs with five screws per wheel.
  • Duralumin Front Underguard: Protects the front chassis during minor off-road impacts.
  • Concealed Body Mounts: Internal mounting points preserve the realistic exterior appearance.
  • Type 540 Brushed Motor Included: Provides electric power for the rear drivetrain.
  • Hobbywing THW 1060 ESC Included: Brushed electronic speed controller supplied with the Australian-market package.

Specifications

  • Brand: Tamiya
  • Model: Lamborghini Cheetah (2026)
  • Manufacturer Item Number: 58754
  • Australian Product Code: 58754-600
  • Barcode / EAN: 4950344587544
  • Tamiya Series: Electric RC Car Series No. 754
  • Product Type: Electric RC Off-Road Car Kit
  • Scale: 1/12
  • Completion Level: Unassembled Kit
  • Original Tamiya Model Year: 1978
  • Re-Release Year: 2026
  • Power Type: Electric Brushed
  • Drive System: Rear-Wheel Drive (2WD)
  • Motor: Type 540 Brushed (Included)
  • Electronic Speed Controller: Hobbywing THW 1060 Brushed ESC (Included in Australian 58754-600 Package)
  • Motor Position: Rear
  • Chassis Material: Duralumin
  • Chassis Design: U-Shaped Plate
  • Body Material: Rigid Styrene Plastic
  • Body Moulded Colour: Desert Yellow
  • Body Finish: Requires Detail Painting
  • Transmission: Enclosed Gearbox
  • Standard Gear Ratio: 24:1
  • Alternative Gear Ratios: 17:1 and 10:1 (Using Appropriate Gear Configurations)
  • Front Suspension: Independent Double Wishbone
  • Rear Suspension: Independent Double Wishbone
  • Spring Type: Adjustable Longitudinal Metal Torsion Bars
  • Steering: Two-Piece Tie Rod Linkage
  • Tyre Type: Semi-Pneumatic
  • Tyre Tread: Flat Chevron Pattern
  • Tyre Diameter: 78mm
  • Tyre Width: 33mm
  • Wheel Construction: Three-Piece
  • Overall Length: 410mm
  • Overall Width: 175mm
  • Overall Height: 140mm
  • Wheelbase: 246mm
  • Front Protection: Duralumin Underguard
  • Recommended Radio: 2-Channel or Higher
  • Steering Servo: Required Separately
  • Drive Battery: Compatible 7.2V–7.4V Pack (Not Included)
  • Battery Charger: Required Separately

Includes

  • 1 x Tamiya Lamborghini Cheetah (2026) 1/12 Scale Unassembled RC Kit
  • 1 x Type 540 Brushed Electric Motor
  • 1 x Hobbywing THW 1060 Brushed Electronic Speed Controller
  • 1 x Desert Yellow Moulded Styrene Plastic Body Set
  • Duralumin Chassis and Equipment Tray Components
  • Rear Gearbox and Drivetrain Components
  • Independent Suspension Components and Metal Torsion Bar Springs
  • 4 x Semi-Pneumatic Tyres with Three-Piece Wheels
  • 1 x Driver Figure
  • Interior and Exterior Scale Detailing Components
  • Front Underguard and Bumper Components
  • Assembly Hardware
  • Instruction Manual

Required to Complete

  • 2-Channel or Higher RC Transmitter and Compatible Receiver
  • 1 x Compatible Steering Servo
  • 1 x Suitable 7.2V–7.4V Rechargeable Drive Battery
  • 1 x Compatible Battery Charger
  • Transmitter Batteries as Required by the Selected Radio System
  • Tamiya TS Spray Paint and Acrylic Detail Paints as Desired
  • Suitable Modelling Tools and Adhesives

FAQ

Is the Tamiya Lamborghini Cheetah (2026) ready to run? No. It is an unassembled RC kit requiring chassis construction, installation of the radio equipment and steering servo, and connection of a suitable battery before driving. Paint and modelling tools are also required for finishing.

Does the Australian 58754-600 kit include a motor and ESC? Yes. The Australian product listing specifies a Type 540 brushed motor and Hobbywing THW 1060 brushed electronic speed controller. Radio equipment, steering servo, battery and charger are sold separately.

Is the Lamborghini Cheetah four-wheel drive? No. Like the original Tamiya model, the 2026 Cheetah uses rear-wheel drive (2WD) with its electric motor mounted at the rear of the chassis.

What suspension does the Tamiya Lamborghini Cheetah use? It features independent double-wishbone suspension at all four wheels, with adjustable longitudinal metal torsion bar springs. This is different from conventional coil-over oil shock suspension.

What type of paint should I use on the Cheetah body? The body is rigid styrene plastic moulded in Desert Yellow. Tamiya TS spray paints and suitable acrylic detail paints can be used for finishing. Tamiya PS paints are intended for flexible polycarbonate RC body shells and are not the recommended choice here.

Can I change the gear ratio on the Lamborghini Cheetah? Yes. Tamiya specifies a standard ratio of 24:1, with alternative 17:1 and 10:1 setups possible using the appropriate gear configurations. Check the assembly instructions and monitor drivetrain temperatures when changing ratios.

Important Notes

  • This product is an unassembled RC assembly kit, not a ready-to-run vehicle.
  • Australian product code: 58754-600. Original Tamiya item number: 58754.
  • The Australian-market package is specified with a Type 540 brushed motor and Hobbywing THW 1060 ESC.
  • Radio system, steering servo, drive battery, charger and transmitter batteries are not included.
  • The rigid styrene body is moulded in Desert Yellow and requires painting for a fully detailed scale finish.
  • Use paints and adhesives suitable for rigid styrene plastic.
  • Although the ESC may support additional battery configurations, use a battery appropriate for the complete motor and vehicle system.
  • Follow the ESC instructions when selecting battery chemistry and low-voltage protection settings.
  • Alternative gear ratios may require changes to the standard gear configuration.
  • Product images may show an assembled and professionally painted model.
  • Kit contents may differ in other international markets.