Hobbywing Xerun XR8 Pro G3 1/8 Sensored Brushless ESC 30113400

The Hobbywing Xerun XR8 Pro G3 is a 1/8 scale competition sensored brushless ESC designed for RC racers needing smooth throttle control, strong braking adjustment and high-current 2S to 4S LiPo power handling.

This XR8 Pro G3 speed controller suits demanding 1/8 off-road, 1/8 on-road, 1/10 short course and monster truck applications where precise tuning, efficient power delivery and temperature management are important.

Features

• 200A continuous current and 1080A peak current support high-power competition RC setups
• 2S to 4S LiPo input range suits a wide range of racing and high-performance RC applications
• Sensored brushless control provides smooth throttle response and predictable low-speed control
• Advanced Boost and Turbo timing functions allow detailed race tuning with compatible motors
• Dual brake mode supports both traditional braking feel and closed-loop torque brake control
• Smart freewheeling technology improves drive efficiency and helps reduce operating temperature
• Built-in reverse polarity protection helps protect the ESC from incorrect battery connection
• Capacitor thermal protection helps prevent capacitor overload damage
• Real-time data recording is supported when used with a compatible Hobbywing OTA module
• IP5X dustproof rating helps protect the ESC from dust in RC racing environments
• Frameless fan design helps reduce damage from small stones, sand and debris
• Intelligent fan start and stop function reduces noise and power use when cooling is not required
• Custom ultra-soft 11AWG silicone wires are factory installed for high-current wiring flexibility
• Programmable with compatible Hobbywing OTA Programmer or LCD Program Box Pro

Specifications

• Brand: Hobbywing
• Model: Xerun XR8 Pro G3
• SKU / Part Number: HW30113400 / 30113400
• EAN: 6938994408660
• Product Type: Electronic speed controller
• Scale: 1/8
• Motor Type: Brushless sensored
• Input Voltage: 2S to 4S LiPo
• Continuous Current: 200A
• Peak Current: 1080A
• BEC Output: 6V / 7.4V adjustable
• BEC Continuous Current: 6A switch-mode
• Braking Modes: FOC / BLDC
• Programming: Hobbywing OTA Programmer or LCD Program Box Pro
• Program Port: Independent programming port
• Data Recording: Real-time data supported with compatible OTA module
• Firmware Upgrade: Supported
• Input Wires: Black 11AWG 200mm x 2
• Output Wires: Black 11AWG 200mm x 3
• Input Connector: Not included
• Output Connector: Not included
• Fan Type: Frameless fan
• Fan Size: 30 x 30 x 10mm
• Fan Voltage Range: 5V to 8.4V
• Fan Power Source: Powered by BEC
• Waterproof Rating: Not waterproof
• Dust Protection: IP5X dustproof rating
• Recommended Motor Size: 4268 or 3660 size motor
• Motor Limit: 3S LiPo up to 4000KV 3660 size motor / 4S LiPo up to 3000KV 4268 size motor
• Suitable Applications: 1/8 off-road, 1/8 on-road racing, 1/10 short course and monster truck
• Dimensions: 54.8 x 36.8 x 38.8mm
• Weight: 102.8g

Includes

• 1 x Hobbywing Xerun XR8 Pro G3 1/8 competition sensored brushless ESC
• 1 x Set of factory-installed ultra-flex 11AWG wires
• 1 x Factory decal sheet
• 1 x Accessory set

FAQ

Does the Hobbywing XR8 Pro G3 include battery or motor connectors? No. The XR8 Pro G3 is listed with no input or output connectors fitted, so suitable connectors must be soldered separately for the vehicle setup.

What batteries can the XR8 Pro G3 use? The Hobbywing XR8 Pro G3 is designed for 2S to 4S LiPo battery setups.

Is the XR8 Pro G3 waterproof? No. Hobbywing lists the XR8 Pro G3 as not waterproof, although it does have IP5X dustproof protection.

What programmer works with the XR8 Pro G3? The XR8 Pro G3 can be programmed with a compatible Hobbywing OTA Programmer or Hobbywing LCD Program Box Pro.

Important Notes

• Use suitable ESC settings for your motor, battery, gearing and track conditions.
• Incorrect timing, gearing or brake settings may overheat or damage the ESC or motor.
• Check ESC and motor temperatures during setup and after gearing or timing changes.
• Battery connectors and motor connectors are not listed as included and may need to be soldered separately.
• This ESC is not waterproof; avoid water exposure and dry the vehicle properly after damp or dusty use.
• Use only with suitable LiPo batteries, motors and wiring rated for the current draw of the vehicle.