SkyRC EN18 NiMH Peak Charger w/Deans Plug SK-100184-01

SkyRC EN18 NiMH Peak Charger w/Deans Plug SK-100184-01.

Compact but Versatile!

Want to get the most out of your batteries? You really need to make sure you can deliver a full charge to your batteries with a SkyRC eN18 Peak Charger.

SkyRC eN18 is more than just a peak charger - it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the SkyRC eN18 offers voltage ranging from 4.8 to 14.4V at 1.2 amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks, and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receiver's pack.

Delta-V Peak detection

With the Delta Peak detection circuitry, the SkyRC eN18 allows your batteries to reach their full capacity when charging, so you can get the most power and run time from your batteries. It achieves this by using peak detection circuitry that monitors the voltage of the battery pack while it's being charged and automatically shuts the charger off when the packs' voltage peaks and then starts to drop. This is in contrast to a timed charger, where you often end up with a battery pack that's not fully charged.

Features

• Delta Peak detection circuitry
• Compact and lightweight
• NiMH compatible
• Maximum output: 1.2A
• Short-Circuit Protection Reverse Connection Protection
• Universal-Voltage Input
• Accurate voltage
• High Reliability
• Lower Operating Temperature
• High-efficiency and Energy-saving

Specifications

• Dimension: 85mm×50mm×54mm
  
• Weight: 120g
  
• Input: AC100V-240V 50/60Hz
  
• Battery Type: NiMH
  
• Output Voltage: 4.8V-14.4V
  
• Output Curent: 1.2A
  
• Output Power: 18W Max.
  
• Battery Cell: 4-8S
  
• Output Cable Length: 70cm
  
• Operating Temperature: 0℃-40℃
  
• Relative Humidity: 5%-75%
  
• Storage Temperature: -10℃ - 70℃
  
• Storage Humidity: 5%-75%